The function of the parent grain refers to various plastics that help the agent concentrate. The direct increase helps the agent not easily disperse and is not very efficient in use, so it is usually increased by the masterbatch table.

feature

Particle size: The particle solid composed of particle size 0.1~3mm is a powder solid. 0.1mm (100μm) is the powder composed of particles; 1~10μm is the fine powder; 0.1~1μm is the colloidal powder; '3mm particles are step-by-step solid blocks. The particle size is smaller, and the mixture obtained is denser. However, the particle size of uniform solids is smaller, and it is easier to adsorb interconnected groups between particles. This grouping is also difficult to disperse in the Reftex melt when it is not easy to open with another solid particle mixture. Crystal size distribution: wide particle size distribution powder filling narrow particle size is denser than grain size distribution. Because small particle size can enter between large particles in the gap, but mix two large powder batches with particle size difference, and then it is difficult to mix evenly.
Hardness of functional masterbatch: powder particles with too high hardness- Ceramic powder, inorganic antibiotics, quartz sand, etc. will produce the surface of the mixing device, which will not only reduce the service life of the equipment, but also reduce the service life of the equipment, causing the mixing color to be dim and turn gray, which will be severe when it will directly change

work

the main components of the packaging masterbatch:
1). Filling: If calcium carbonate, talc powder, etc.
2). Resin receptor: If carbide ether hydride, etc.
3). Dispersant: If polyethylene wax and hardenate salt.
4). Carrier resin.
Hygroscopic defoaming masterbatch
hygroscopic defoaming masterbatch is + through metal oxide compounds + resin aid agent.
Flame retardant masterbatch flame
retardant masterbatch is + through combustion inhibitor + resin aid agent.
The goddess of the guide Leiling
will lead Leiling goddess long copper textile fibers and resin, which will carry gables and cut grains. The foam masterbatch
foam
masterbatch is composed of compound foaming agent, lubricant, dispersant, and coloring agent.
The anti-UV masterbatch
anti-UV masterbatch uses two anti-UV agents to carry it. Compound, attached to the carrier, dispersant again assists in the preparation of the reagent.
Five Days of Bear Mother Cereals
The time of Bear Five Days of Bear Masterbatch is +by light stabilizer + resin to help the agent.

Function

Reducing the temperature
The possibility of masterbatch mainly used for PP may reduce the temperature to 30-50 degrees.
Adding bright masterbatch
plus bright masterbatch also calls luminescent masterbatch, with the goal of enhancing the radiation of the product, its main brightener has ethyl doubletough agent, generally colored female dose 20%-30%, and 0.2% in the product - 0.3%, too much will affect the product printing effect.
When strengthening masterbatch production, sometimes the material is prone to stack feed openings because it is mainly due to the air caused by Talcum powder trap. When the production should be heated and stirred, let the wax melt, moist talcum powder or add white mineral oil.
Hygroscopic defoaming
masterbatches can be mainly removed in plastic to contain low molecular volatile substances with moisture content and unclear low molecular volatile substances, so the plastic products do not have bubbles with water splashes, so the drying process can be subtracted to ensure product quality.
Flame retardant
masterbatches are mainly used for this improvement in
flame retardant, and
fresh masterbatches are often used in PE, PP, EVA, etc.